Safe to use on most types of foam.
The N/O-05 is a 3D printer “infiltrant”. The N/O-05 is a thin CA that is odorless, fumeless, and hypoallergenic. This watery-thin adhesive infiltrates hairline fractures, pores, and narrow slots filling any empty voids. Well suited for porous and fragile material such as foam, soft wood (balsa), ceramics, unpolished minerals, and fossil bones. For inlay applications, the adhesive penetrates and stabilizes the material through capillary action. It is often used as a finish by applying several coats, sanding, and then polishing to a high gloss.
Projects with limited ventilation
Individuals that experience allergic symptoms to regular CA
Infiltrating and stabilizing 3D printed parts.
Repairing and filling cracks, inclusions, voids, and knots in the wood
Woodturning and knife handle finishes for a hard, clear, and waterproof coat.
Wicking into and stabilizing guitar frets
Installing bindings and purflings on a guitar
Gluing and repairing guitar inlays on the headstock, body, and fretboard
Fossil preparation through infiltration and stabilization of the fossil before extraction.
Repairing small cracks in the stone
Metal and turquoise inlays.
Jewelry manufacturing and repair.
Furniture refinishing and antique repair
Bonding fiberglass to balsa wood
Rocks & Minerals
PVC and Most Plastics
Most types of Foam
Always test compatibility before using on your project.
Available in 2 ounce size
There are no reviews yet.